• 1. Welcome
• 2. Introduction
  • 2.1. About CTOME
  • 2.2. Getting help and updates
• 3. Starting with CTOME
  • 3.1. Requirement
  • 3.2. Installation
• 4. Laser Ultrasonic testing in Metallurgy
  • 4.1. Introduction
  • 4.2. Measured Quantities
  • 4.3. Process Variables and sensitivity
  • 4.4. Application of the LUMet technology
  • 4.5. Monitoring of phase transformation in steel
  • 4.6. Measurement of ferrite recrystallization in steel
  • 4.7. Monitoring of Austenite recrystallization in steel
  • 4.8. Monitoring of recovery process in steel
  • 4.9. Evaluation of grain size in other metals
  • 4.10. Monitoring of recrystallization in Aluminum alloys
  • 4.11. Evaluation of residual stresses in Aluminum alloys
  • 4.12. Monitoring of phase transformation in Titanium
  • 4.13. Ageing study in beta stabilized Titanium alloys
  • 4.14. Evaluation of texture in hexagonal material
  • 4.15. Monitoring of sintering process
  • 4.16. Evaluation of plastic strain ratio in metals
  • 4.17. Elastic Moduli measurements in other compounds
  • 4.18. Additional information concerning advance LUMet testing.
• 5. LUMFILE (Lumet file analysis)
  • 5.1. Introduction
  • 5.2. Software parameters
  • 5.3. Methodology:
  • 5.4. Analysis criterion
  • 5.5. Error estimates
  • 5.6. Getting started
  • 5.7. Tutorials and step by steps
• 6. PROFILE (ASCII multiple file processing)
  • 6.1. General module descrition
  • 6.2. Tutorials
• 7. Reference